This is our basic mile marker clock. It's small and light, yet has 6 digits for displaying time up to 99 hours, 59 minutes and 59 seconds. The clock can count up or down so it's ideal for use as a countdown clock. It only weighs 14.4 pounds so it can easily carried around and placed at mile marker locations. It's water resistant so it will work fine when it's raining. The optional case protects the clock when it's being transported.
Simple Controls: Easy to understand pushbutton controls on the side allow you to set the hours, minutes and seconds, count up or down, stop the clock, or reset the clock back to zero.
Flush Buttons: We have upgraded our choice of buttons to be flush mounted so they will not break off when the clock is being tossed around in the back of a truck or when storing the clocks in a case.
Never Forgets Time: The clock always remembers the count even when the clock is turned off. Once the time is set, you can shut the clock off for as long as you need and when you turn it back on, the clock continues as though it was never turned off. This is a great power-saving feature if you need to transport the clock to a split location along a course. (only works when counting up)
Wireless Remote: These clocks support an infrared remote (requires separate purchase). The remote can be used to start and stop the clock, count up or down, and set the initial time on the clock.
2.4Ghz Radio Transceiver: All of our clocks now have an internal 2.4Ghz transceiver which allows one clock to be set from another. Simply set 1 clock, then push the "broadcast time" button and any other "Rx" series clock within a 30 Meter range will be automatically set. This feature is most useful when setting clocks along a race course.
(optional) Lightbox Watch: Our Lightbox Watch can be used to remotely set any "Rx" series clock. The idea is that you wear the watch at the start of a race and press the start button. Walk back to the finish and press the transmit button and the time is wirelessly transferred to the finish clock.
2 PPM Accuracy: That means that if 2 clocks were started, after 1 million seconds (11.5 days), they would only be different by plus or minus 2 seconds
Charging Indicators: 1 LED indicator on the side of the clock indicate the state of charging. Blinking Red means there's a bad connection, solid red means the batteries are charging and the charge level is below 90%, blinking green means the batteries are charging and the charge level is above 90%, solid green means the batteries are fully charged. Replacing the batteries on the single sided clocks is easy. Just remove the back panel for access. You can purchase replacement batteries at any Batteries-Plus store or whatever store that carries batteries.
Weight: 14.4 Pounds
Batteries: 12V 2.9Ah Sealed Lead Acid
Run Time: 10 Hours on battery, indefinitely when plugged in.
Infrared Remote Control